Intelix DIGI-P122 User Manual download pdf (Page 12)

DIGI-P122 / DIGI-P123 Installation Guide

TCP/IP Setup and Control

IP Address Setup via Web Browser

Configuring the TCP/IP port is done via a web browser interface. A crossover cable is required for

the initial setup. The default IP address is printed on a sticker on the side of the DIGI-P122/123.

1. Configure the computer to use the same network prefix as the IP address assigned to the

DIGI-P122/123. For example, the IP address of the DIGI-P122/123 is 192.168.0.178. Set

the computer to use a static IP address within the same network range, such as

192.168.0.42.

2. Connect the crossover cable to the computer and to the TCP/IP port on the DIGI-

P122/123.

3. Open up Internet Explorer (Firefox, Chrome, and Safari crop the configuration options).

4. Enter the IP address printed on the sticker into the browser URL bar, which will take you

to the Login screen.

5. The Default password is “888888”.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Intelix DIGI-P122 User Manual Page 12