DIGI-P122 / DIGI-P123 Installation Guide
RS232 and TCP/IP Commands
RS232 Settings: 9600 baud, 8 Data bits, 1 Stop bit, Parity = None
TCP/IP Settings: User defined IP address, port 4001
<CR> = Carriage return (Hex 0D)
<LF> = Line Feed (Hex 0A)
Switching Commands
Composite video (AV1) input select
Composite video (AV2) input select
Get the currently selected input source
Displays one of the above
Source: responses
Video Commands
Set the resolution to 1360x768 (HD)
Resolution: HD
1360X768<CR><LF>
Set the resolution to 1024x768 (XGA)
Resolution: XGA
1024X768<CR><LF>
Set the resolution to 1280x720 (720p)
Resolution: 720P
1280X720<CR><LF>
Set the resolution to 1280x800 (WXGA)
Resolution: WXGA
1280X800<CR><LF>
Set the resolution to 1920x1080 (1080p)
Resolution: 1080P
1920X1080<CR><LF>
Get the currently selected output resolution
Displays one of the above
Resolution: responses
Aspect Mode – Output Native On
Aspect Mode – Output Native Off
16
Comments to this Manuals