Intelix DIGI-P122 User Manual download pdf (Page 8)

DIGI-P122 / DIGI-P123 Installation Guide

IR Remote

The included IR remote performs all of the functions available on the front

panel of the DIGI-P122/P123, and also allows acces to the setup menu.

Installation Instructions

Shelf Mounting Instructions

Attach the supplied rubber feet to the bottom of the unit.

Rack Mounting Instructions

The DIGI-P122/123 requires one rack unit (1 RU) of space. At least 2 inches of free air space is

required on both sides of the DIGI-P122/123 for proper side ventilation. Avoid mounting the unit

near a power amplifier or any other source of significant heat. It is recommended that you leave

an empty rack space above and below the DIGI-P122/123 for additional cooling.

Twisted Pair Output (DIGI-P123)

The DIGI-P123 includes an HDBaseT Lite extender

output. When used in conjunction with compatible

HDBaseT receivers (see Tech Specs), the scaled signal

may be transmitted up to 70m (230’) away. Additionally,

the user may connect via RS232 to the HDBaseT receiver,

and control the DIGI-P123. Connection should be made

using Cat6 unshielded or shielded cable. Please

terminate both ends using EIA/TIA-568B crimp pattern,

as shown in this diagram.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Intelix DIGI-P122 User Manual Page 8